root@cubietruck:/# dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.79 (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Mar 22 18:38:45 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 – 0x4300ffff ( 64 kB)
[ 0.000000] G2D : 0x50000000 – 0x50ffffff ( 16 MB)
[ 0.000000] LCD : 0x51000000 – 0x52ffffff ( 32 MB)
[ 0.000000] cma: CMA: reserved 192 MiB at 43c00000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c08ae200, node_mem_map d3000000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2576 pages used for memmap
[ 0.000000] HighMem zone: 327152 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @d400e000 s7040 r8192 d13440 u32768
[ 0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192
[ 0.000000] Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try ’cgroup_disable=memory’ option if you don’t want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1818820k/1818820k available, 278332k reserved, 1318912K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 – 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 – 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 – 0xc0810000 (8224 kB)
[ 0.000000] .init : 0xc0810000 – 0xc0848b80 ( 227 kB)
[ 0.000000] .data : 0xc084a000 – 0xc08b63b0 ( 433 kB)
[ 0.000000] .bss : 0xc08b63d4 – 0xc0a740f8 (1784 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:192
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] start_kernel(): bug: interrupts were enabled early
[ 0.000000] Console: colour dummy device 80×30
[ 0.000000] console [tty0] enabled
[ 0.014082] Calibrating delay loop… 1816.98 BogoMIPS (lpj=9084928)
[ 0.076011] pid_max: default: 32768 minimum: 301
[ 0.079726] Mount-cache hash table entries: 512
[ 0.084075] Initializing cgroup subsys cpuacct
[ 0.087422] Initializing cgroup subsys memory
[ 0.090863] Initializing cgroup subsys devices
[ 0.094326] Initializing cgroup subsys freezer
[ 0.097567] Initializing cgroup subsys blkio
[ 0.101259] Initializing cgroup subsys perf_event
[ 0.104860] CPU: Testing write buffer coherency: ok
[ 0.110111] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.117255] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.122826] Setting up static identity map for 0x405c43d0 – 0x405c4428
[ 0.238813] CPU1: Booted secondary processor
[ 0.297781] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.299797] Brought up 2 CPUs
[ 0.305161] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
[ 0.308540] devtmpfs: initialized
[ 0.316027] dummy:
[ 0.326778] NET: Registered protocol family 16
[ 0.335901] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.343930] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.348760] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.351950] [ccu-inf] aw clock manager init
[ 0.354237] [ccu-inf] aw_ccu_init
[ 0.358226] [ccu-inf] script config pll3 to 297MHz
[ 0.361996] [ccu-inf] script config pll4 to 300MHz
[ 0.365781] [ccu-inf] script config pll6 to 600MHz
[ 0.369548] [ccu-inf] script config pll7 to 297MHz
[ 0.373313] [ccu-inf] script config pll8 to 336MHz
[ 0.376137] Init eGon pin module V2.0
[ 0.385576] bio: create slab bio-0 at 0
[ 0.389176] sunxi_gpio driver init ver 1.3
[ 0.394899] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
[ 0.398108] SCSI subsystem initialized
[ 0.401057] libata version 3.00 loaded.
[ 0.405769] usbcore: registered new interface driver usbfs
[ 0.410145] usbcore: registered new interface driver hub
[ 0.414375] usbcore: registered new device driver usb
[ 0.417559] Linux media interface: v0.10
[ 0.421193] Linux video capture interface: v2.00
[ 0.426912] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.433092] cfg80211: Calling CRDA to update world regulatory domain
[ 0.437801] Switching to clocksource arch_sys_counter
[ 0.439977] FS-Cache: Loaded
[ 0.442218] CacheFiles: Loaded
[ 0.456993] config i2c gpio with gpio_config api
[ 0.460300] I2C: i2c-0: AW16XX I2C adapter
[ 0.464397] NET: Registered protocol family 2
[ 0.470815] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.477930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.485529] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.492151] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.494379] TCP: reno registered
[ 0.499271] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.504640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.508321] NET: Registered protocol family 1
[ 0.513679] RPC: Registered named UNIX socket transport module.
[ 0.517364] RPC: Registered udp transport module.
[ 0.521035] RPC: Registered tcp transport module.
[ 0.526529] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.529339] pm: select wifi: ap6210
[ 0.532130] ap6xxx: config 32k clock
[ 0.535368] [wifi_pm]: wifi gpio init is OK !!
[ 0.538390] [rfkill]: rfkill set power 0
[ 0.543599] audit: initializing netlink socket (disabled)
[ 0.547331] type=2000 audit(0.520:1): initialized
[ 0.551751] highmem bounce pool size: 64 pages
[ 0.565057] VFS: Disk quotas dquot_6.5.2
[ 0.570594] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.577903] NFS: Registering the id_resolver key type
[ 0.582844] NTFS driver 2.1.30 [Flags: R/W].
[ 0.586260] fuse init (API version 7.18)
[ 0.589854] msgmni has been set to 1360
[ 0.601495] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[ 0.604866] alg: No test for stdrng (krng)
[ 0.611619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.614639] io scheduler noop registered
[ 0.617882] io scheduler deadline registered
[ 0.621763] io scheduler cfq registered (default)
[ 0.626752] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.632410] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.637342] [uart]: used uart info.: 0x05
[ 0.642070] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 0.668536] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 1.415958] console [ttyS0] enabled
[ 1.424468] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 1.456509] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 1.466228] G2D: drv_g2d_init
[ 1.473948] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
[ 1.482940] G2D: head:d0000000,tail:d1000000
[ 1.490565] G2D: Module initialized.major:250
[ 1.498133] brd: module loaded
[ 1.507786] loop: module loaded
[ 1.514342] [NAND] nand driver version: 0x2 0x9
[ 1.581930] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
[ 1.595049] Dev Sunxi softw311 nand magic does not match for MBR 2:
[ 1.608124] Dev Sunxi softw311 nand magic does not match for MBR 3:
[ 1.621205] Dev Sunxi softw311 nand magic does not match for MBR 4:
[ 1.636007] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
[ 1.651974] Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0
[ 1.663890] Dev Sunxi softw411 nand header: CRC bad for MBR 2
[ 1.676571] Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0
[ 1.688459] Dev Sunxi softw411 nand header: CRC bad for MBR 3
[ 1.701094] Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0
[ 1.712996] Dev Sunxi softw411 nand header: CRC bad for MBR 4
[ 1.724180] Dev Sunxi softw411 nand: part 1, start 32768, size 131072
[ 1.736213] Dev Sunxi softw411 nand: part 2, start 163840, size 6291456
[ 1.748501] Dev Sunxi softw411 nand: part 3, start 6455296, size 8585216
[ 1.757752] nand: nanda nandb nandc
[ 1.764745] [NAND]nand driver, ok.
[ 1.774622] sw_ahci sw_ahci.0: controller can’t do PMP, turning off CAP_PMP
[ 1.785905] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 1.798689] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.813618] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 1.825552] scsi0 : sw_ahci_platform
[ 1.836436] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.847757] PPP generic driver version 2.4.2
[ 1.856130] PPP BSD Compression module registered
[ 1.864882] PPP Deflate Compression module registered
[ 1.875128] PPP MPPE Compression module registered
[ 1.883448] NET: Registered protocol family 24
[ 1.893898] ehci_hcd: USB 2.0 ’Enhanced’ Host Controller (EHCI) Driver
[ 1.905704] ohci_hcd: USB 1.1 ’Open’ Host Controller (OHCI) Driver
[ 1.914391] [sw-ehci1]: open clock
[ 1.940494] [sw-ehci1]: Set USB Power ON
[ 1.950859] sw-ehci sw-ehci.1: SW USB2.0 ’Enhanced’ Host Controller (EHCI) Driver
[ 1.964703] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 1.978290] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[ 2.002262] sw-ehci sw-ehci.1: USB 2.0 started, EHget=”_blank”>CI 1.00
[ 2.011267] hub 1-0:1.0: USB hub found
[ 2.017931] hub 1-0:1.0: 1 port detected
[ 2.024649] [sw-ohci1]: open clock
[ 2.054235] sw-ohci sw-ohci.1: SW USB2.0 ’Open’ Host Controller (OHCI) Driver
[ 2.067714] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 2.079117] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[ 2.145416] hub 2-0:1.0: USB hub found
[ 2.152139] hub 2-0:1.0: 1 port detected
[ 2.158790] [sw-ehci2]: open clock
[ 2.184955] [sw-ehci2]: Set USB Power ON
[ 2.195349] sw-ehci sw-ehci.2: SW USB2.0 ’Enhanced’ Host Controller (EHCI) Driver
[ 2.209188] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 2.222731] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[ 2.252342] sw-ehci sw-ehci.2: USB 2.0 started, EHget=”_blank”>CI 1.00
[ 2.261309] hub 3-0:1.0: USB hub found
[ 2.267970] hub 3-0:1.0: 1 port detected
[ 2.274663] [sw-ohci2]: open clock
[ 2.304248] sw-ohci sw-ohci.2: SW USB2.0 ’Open’ Host Controller (OHCI) Driver
[ 2.317680] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 2.329107] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[ 2.395411] hub 4-0:1.0: USB hub found
[ 2.402126] hub 4-0:1.0: 1 port detected
[ 2.411493] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.419915] sunxi_musb_drvinit():
[ 2.425562] sunxi_musb_probe():
[ 2.430918] sunxi_musb_init():
[ 2.436025] usb_clock_init():
[ 2.441029] open_usb_clock():
[ 2.465617] UsbPhyInit():
[ 2.471227] sunxi_musb_board_priv_init():
[ 2.476645] pin_init():
[ 2.482004] USBC_ForceId(): id_type host
[ 2.489591] USBC_ForceVbusValid(): vbus_type high
[ 2.496589] sunxi_musb_disable():
[ 2.509487] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.523356] musb-hdrc: MHDRC RTL version 0.0
[ 2.531727] musb-hdrc: 11/11 max ep, 5184/8192 memory
[ 2.540926] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 2.552562] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 5
[ 2.563304] hub 5-0:1.0: USB hub found
[ 2.569960] hub 5-0:1.0: 1 port detected
[ 2.576139] sunxi_musb_enable():
[ 2.582595] sunxi_musb sunxi_musb: is_on = 1
[ 2.590610] sunxi_musb_board_priv_set_phy_power():
[ 2.599234] sunxi_musb sunxi_musb: Set USB Power On
[ 2.607002] USBC_ForceId(): id_type host
[ 2.614582] USBC_ForceVbusValid(): vbus_type high
[ 2.626816] musb-hdrc musb-hdrc: USB Host mode controller at f00d8000 using PIO, IRQ 70
[ 2.639632] mousedev: PS/2 mouse device common for all mice
[ 2.650234] input: sunxi-ir as /devices/virtual/input/input0
[ 2.657480] IR Initial OK
[ 2.665704] ===========================hv_keypad_init=====================
[ 2.675997] ========HV Inital ===================
[ 2.684676] tkey_fetch_sysconfig_para: tkey_unused.
[ 2.696873] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
[ 2.709136] i2c i2c-0: Invalid probe address 0x00
[ 2.716595] rtc: enable pmu backup
[ 2.726243] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 2.734897] i2c /dev entries driver
[ 2.740422] [ace_drv] start!!!
[ 2.745917] [ace_drv] init end!!!
[ 2.750936] [pa_drv] start!!!
[ 2.756197] [pa_drv] init end!!!
[ 2.766583] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 2.780850] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 2.795108] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 2.809565] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 2.824184] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 2.838976] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 2.851099] device-mapper: uevent: version 1.0.3
[ 2.863548] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.877028] device-mapper: multipath: version 1.3.0 loaded
[ 2.888060] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.900176] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 2.912375] device-mapper: multipath service-time: version 0.2.0 loaded
[ 2.922358] cpuidle: using governor ladder
[ 2.929339] cpuidle: using governor menu
[ 2.935650] [mmc-msg] sw_mci_init
[ 2.944758] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[ 2.957641] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 2.971939] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.989209] [mmc-msg] sdc0 Probe: base:0xf00dc000 irq:64 sg_cpu:c3c5f000(43c5f000) ret 0.
[ 3.003297] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 3.017569] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.034826] [mmc-msg] sdc3 Probe: base:0xf00de000 irq:67 sg_cpu:c3c60000(43c60000) ret 0.
[ 3.047627] [mmc_pm]: failed to fetch sdio card configuration!
[ 3.055884] sunxi_leds driver init
[ 3.063483] Registered led device: blue:ph21:led1
[ 3.072183] Registered led device: orange:ph20:led2
[ 3.080910] Registered led device: white:ph11:led3
[ 3.089587] Registered led device: green:ph07:led4
[ 3.099485] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.110826] usbcore: registered new interface driver usbhid
[ 3.119267] usbhid: USB HID core driver
[ 3.125997] ashmem: initialized
[ 3.132843] logger: created 256K log ’log_main’
[ 3.141209] logger: created 256K log ’log_events’
[ 3.149666] logger: created 256K log ’log_radio’
[ 3.158110] logger: created 256K log ’log_system’
[ 3.169521] IPv4 over IPv4 tunneling driver
[ 3.176754] TCP: bic registered
[ 3.182228] TCP: cubic registered
[ 3.188076] TCP: westwood registered
[ 3.194285] TCP: highspeed registered
[ 3.200246] TCP: hybla registered
[ 3.205746] TCP: htcp registered
[ 3.211257] TCP: vegas registered
[ 3.216757] TCP: veno registered
[ 3.222528] TCP: scalable registered
[ 3.228115] TCP: lp registered
[ 3.233403] TCP: yeah registered
[ 3.239164] TCP: illinois registered
[ 3.245995] Initializing XFRM netlink socket
[ 3.254511] NET: Registered protocol family 10
[ 3.263567] NET: Registered protocol family 17
[ 3.271526] NET: Registered protocol family 15
[ 3.280651] [mmc_pm]: No sdio card, please check your config !!
[ 3.290268] Registering the dns_resolver key type
[ 3.300185] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.308505] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 3.324853] Registering SWP/SWPB emulation handler
[ 3.335090] ata1.00: HPA detected: current 62531183, native 62533296
[ 3.348063] [cpu_freq] ERR:try to get regulator failed, core vdd will not changed!
[ 3.360293] ata1.00: ATA-9: KingFast, KFJ14001, max UDMA/100
[ 3.371860] [cpu_freq] INF:——————-V-F Table——————-
[ 3.384331] ata1.00: 62531183 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.396014] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[ 3.407217] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[ 3.418423] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[ 3.427846] ata1.00: configured for UDMA/100
[ 3.437188] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[ 3.448420] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[ 3.459585] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[ 3.473310] scsi 0:0:0:0: Direct-Access ATA KingFast KFJ1 PQ: 0 ANSI: 5
[ 3.486519] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[ 3.500003] sd 0:0:0:0: [sda] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.505053] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[ 3.524490] [cpu_freq] INF:———————————————–
[ 3.541149] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
[ 3.555047] registered taskstats version 1
[ 3.564253] [DISP] Invalid mode string: EDID:1280x720p50, ignoring
[ 3.573297] I2C: i2c-1: HDMI I2C adapter
[ 3.581567] sd 0:0:0:0: [sda] Write Protect is off
[ 3.590409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.603614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 3.619335] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 3.628442] sda: sda1
[ 3.636063] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.219612] EDID mode used without valid EDID info
[ 4.226055] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 4.229992] EDID mode used without valid EDID info
[ 4.236417] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 4.269284] Console: switching to colour frame buffer device 160×45
[ 4.276413] EDID mode used without valid EDID info
[ 4.282763] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 4.411407] ehci_irq: port change detect
[ 4.435712] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 4.450708] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 4.465461] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 4.484896] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 4.504089] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 4.523153] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 4.538437] console [netcon0] enabled
[ 4.550524] netconsole: network logging started
[ 4.572516] sunxi-rtc sunxi-rtc: setting system clock to 2014-05-05 04:48:23 UTC (1399265303)
[ 4.588282] ALSA device list:
[ 4.599394] #0: sunxi-CODEC Audio Codec
[ 4.632152] EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard
[ 4.650521] VFS: Mounted root (ext4 filesystem) on device 93:2.
[ 4.675940] devtmpfs: mounted
[ 4.687248] Freeing init memory: 224K
[ 4.701745] Write protecting the kernel text section c0008000 – c0810000
[ 4.719096] usb 3-1: new high-speed USB device number 2 using sw-ehci
[ 4.887257] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 4.907495] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 4.927482] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 4.948192] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 4.968470] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 4.990210] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 5.422197] init: ureadahead main process (66) terminated with status 5
[ 5.464611] init: plymouth main process (67) killed by SEGV signal
[ 6.333360] udevd[144]: starting version 175
[ 6.519149] pwm-sunxi: pwm0 configured – period: 20, duty_percent: 50, duty: 10
[ 6.648604] gmac: use mac address from chipid
[ 6.669957] eth%d: device MAC address 02:8c:02:82:c5:8a
[ 6.684052] [gmac]: sun6i_gmac platform driver registration completed
[ 6.700235] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 6.710074] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 6.728303] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 6.749725] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 6.763108] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 6.773088] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 6.937274] Initializing USB Mass Storage driver…
[ 7.002989] scsi1 : usb-storage 3-1:1.0
[ 7.010170] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 7.015651] usbcore: registered new interface driver usb-storage
[ 7.019244] USB Mass Storage support registered.
[ 7.034737] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 7.041429] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 7.127801] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 7.140860] UMP2: Inserting UMP device driver. Compiled: Mar 22 2014, time: 18:34:56
[ 7.160562] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 7.176050] EDID mode used without valid EDID info
[ 7.182430] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 7.185570] UMP2: Using OS memory backend, allocation limit: 134217728
[ 7.208519] UMP: UMP device driver loaded
[ 7.223906] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 7.376142] EDID mode used without valid EDID info
[ 7.382507] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 7.430456] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 7.431682] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
[ 7.450755] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 7.462971] mali: use config clk_div 1
[ 7.473304] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 7.477038] mali: clk_div 1
[ 7.480476] Mali: mali clock set completed, clock is 312000000 Hz
[ 7.502702] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 7.505955] mali: use config clk_div 1
[ 7.507915] mali: clk_div 1
[ 7.508576] Mali: mali clock set completed, clock is 312000000 Hz
[ 7.543074] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 7.544640] Mali: Mali device driver loaded
[ 7.590596] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 7.849092] [cedar dev]: install start!!!
[ 7.860106] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 7.873126] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 7.879343] [cedar dev]: install end!!!
[ 7.905158] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 7.912012] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 7.924511] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 7.931651] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 8.006101] scsi 1:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 8.027494] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 8.039403] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 8.048891] sd 1:0:0:0: [sdb] 30883840 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 8.063024] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.067327] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 8.074361] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 8.084709] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn’t support DPO or FUA
[ 8.091631] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 8.101481] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 8.108595] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 8.114069] sdb: sdb4
[ 8.125943] bcmdhd: got gpio2, mapped to irqno170
[ 8.132969] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[ 8.145952] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 8.402611] sdio wifi power state: on
[ 8.415516] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 8.430407] [mmc-msg] sdc3 power on
[ 8.456304] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 8.461247] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 8.543676] [mmc-err] smc 3 err, cmd 52, RTO
[ 8.550591] [rfkill]: rfkill set power 1
[ 8.557361] [mmc-err] smc 3 err, cmd 52, RTO
[ 8.575044] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 8.596959] =========== WLAN placed in POWER ON ========
[ 8.610734] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 8.623815] [mmc-err] smc 3 err, cmd 8, RTO
[ 8.642622] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 8.663529] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 8.675981] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.688357] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.700575] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.735194] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 8.748847] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 8.754500] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 8.765814] sunxi_gmac: probed
[ 8.771245] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 8.781549] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 8.791170] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 8.803519] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 8.825166] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 8.832245] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 8.841007] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 8.848077] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 8.855219] mmc1: new high speed SDIO card at address 0001
[ 8.862243] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 8.874165] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 8.876788] Linux Kernel SDIO/MMC Driver
[ 8.888634] init: plymouth-log main process (300) terminated with status 1
[ 8.895349] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 8.907823] bcmdhd: irq=170, flags=0x00000414
[ 8.920041] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 8.927086] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 8.930837] dhdsdio_probe : no mutex held. set lock
[ 8.937370] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 8.941554] F1 signature read @0x18000000=0x1591a962
[ 8.948626] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 8.952724] bcmsdh_config_hw_oob_intr: Enter
[ 8.962390] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 8.966928] DHD: dongle ram size is set to 245760(orig 245760)
[ 8.971314] dhd_attach, firmware path
[ 8.989006] wl_create_event_handler thr:147 created
[ 8.992837] wl_create_event_handler thr:147 started
[ 8.999051] p2p0: P2P Interface Registered
[ 9.010546] dhd_attach thr:149 created
[ 9.019181] dhd_attach thr:149 started
[ 9.023004] dhd_attach thr:14b created
[ 9.031451] dhd_attach thr:14b started
[ 9.037744] dhd_attach thr:14d created
[ 9.042126] dhd_attach thr:14d started
[ 9.064471] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 9.078017] dhdsdio_probe : the lock is released.
[ 9.085681] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 9.095508]
[ 9.095512] Dongle Host Driver, version 1.28.23.3 (r)
[ 9.095517] Compiled in drivers/net/wireless/bcmdhd on Feb 14 2014 at 00:09:03
[ 9.103163] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
[ 9.109872] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 9.116701] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 9.132255] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 9.147632] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 9.156758] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 9.183946] dhd_open, firmware path
[ 9.193795]
[ 9.193810] Dongle Host Driver, version 1.28.23.3 (r)
[ 9.193815] Compiled in drivers/net/wireless/bcmdhd on Feb 14 2014 at 00:09:03
[ 9.202894] wl_android_wifi_on in
[ 9.205445] wl_android_wifi_on: Success
[ 9.208840] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.223593] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
[ 9.228197] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.242782] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
[ 9.248526] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.262959] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
[ 9.275737] dhdsdio_htclk: HT Avail request error: -35
[ 9.280455] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 9.287441] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 9.290841] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.305144] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.309406] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.323656] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.331260] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.341767] sdio wifi power state: off
[ 9.347264] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.350652] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.364681] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.369835] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.383777] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.388080] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.401839] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.405297] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.419004] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.423370] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.436902] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.441218] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.454657] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.458046] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.471337] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.475689] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.486404] =========== WLAN placed in RESET ========
[ 9.491912] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.496281] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.509618] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.517842] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.531149] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.537331] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.550544] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.563672] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.577493] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.580905] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.593761] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.604635] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.618587] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.624299] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.637115] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.641597] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.654506] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.658824] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.671590] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.676116] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.688568] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.692071] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.704591] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.708919] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.721165] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.726225] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.738325] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.745911] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.758032] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 9.762471] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.774324] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 9.778684] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.790332] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 9.794028] dhdsdio_membytes: window change failed
[ 9.797451] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.809026] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.813725] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.825237] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.829697] [mmc-err] smc 3 err, cmd 52, RTO
[ 9.841201] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 9.845821] dhdsdio_membytes: FAILED to set window back to 0x0
[ 9.851207] _dhdsdio_download_firmware: error placing ARM core in reset
[ 9.863691] dhd_bus_start: dhdsdio_probe_download failed. firmware = /lib/firmware/ap6210/fw_bcm40181a2.bin nvram = /lib/firmware/ap6210/nvram_ap6210.txt
[ 9.865931] wl_android_wifi_off in
[ 10.791102] PHY: sunxi_gmac-0:00 – Link is Up – 100/Full
[ 13.450402] init: smbd main process (316) killed by HUP signal
[ 13.454929] init: smbd main process ended, respawning
[ 18.505724] init: plymouth-upstart-bridge main process (414) terminated with status 1
[ 19.740848] eth0: no IPv6 routers present
[ 20.006795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.120360] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 131.416276] EDID mode used without valid EDID info
[ 131.424946] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 131.579632] EDID mode used without valid EDID info
[ 131.586094] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 131.641434] Warning: this sunxi disp driver will see significant redesign.
[ 131.647061] Applications using /dev/disp directly will break.
[ 131.656905] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[ 131.662542] [DISP] layer allocated: 0,101
[ 131.666717] [DISP] request scaler fail
[ 131.670954] [DISP] request scaler layer fail!
[ 134.424444] [drm] Initialized drm 1.1.0 20060810
[ 134.473479] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 134.481434] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 134.488544] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 134.494079] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 134.501028] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 134.507115] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 134.513651] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 134.517894] UMP2: New session opened
[ 134.526194] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 134.534143] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 134.541199] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 134.549024] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 134.556819] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 136.871416] disp resume
[ 143.233584] init: tty1 main process (915) killed by TERM signal
[ 172.196567] sunxi_gmac: probed
[ 172.203111] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 172.207921] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 172.215792] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 172.223445] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 172.231555] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 172.239463] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 172.246826] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 172.251114] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 172.261246] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 174.218135] PHY: sunxi_gmac-0:00 – Link is Up – 100/Full
[ 174.225434] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 184.432744] eth0: no IPv6 routers present
[ 736.618491] disp resume
[ 736.620074] disp suspend
[ 813.552509] net_ratelimit: 1 callbacks suppressed
[ 813.558180] dhd_check_hang: Event HANG send up due to re=0 te=0 e=-36 s=0
[ 813.561632] CFG80211-ERROR) wl_cfg80211_hang : In : chip crash eventing
[ 813.567488] ————[ cut here ]————
[ 813.571332] dhd_ioctl_entry: HANG was sent up earlier
[ 813.575124] dhd_ioctl_entry: HANG was sent up earlier
[ 813.578899] dhd_ioctl_entry: HANG was sent up earlier
[ 813.588131] WARNING: at /work/linux-sdk/linux-sunxi/net/wireless/sme.c:741 cfg80211_disconnected+0xc0/0xcc()
[ 813.592030] dhd_ioctl_entry: HANG was sent up earlier
[ 813.595803] dhd_ioctl_entry: HANG was sent up earlier
[ 813.599599] dhd_ioctl_entry: HANG was sent up earlier
[ 813.601513] Modules linked in: disp_ump mali_drm drm iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables bcmdhd sunxi_cedar_mod mali ump usb_storage lcd sunxi_gmac pwm_sunxidhd_ioctl_entry: HANG was sent up earlier
[ 813.624601] dhd_ioctl_entry: HANG was sent up earlier
[ 813.628376] dhd_ioctl_entry: HANG was sent up earlier
[ 813.628609]
[ 813.629584] Backtrace:
[ 813.636929] [c0012ae4] (dump_backtrace+0x0/0x10c) from [c05bbbb8] (dump_stack+0x18/0x1c)
[ 813.638001] r6:000002e5
[ 813.660973] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : r5:c05a9298 r4:00000000 r3:271ae953
[ 813.672024] [c05bbba0] (dump_stack+0x0/0x1c) from [c0037488] (warn_slowpath_common+0x54/0x6c)
[ 813.680332] [c0037434] (warn_slowpath_common+0x0/0x6c) from [c00374c4] (warn_slowpath_null+0x24/0x2c)
[ 813.685871] wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 813.689294] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : r8:00000000 r7:ee040120 r6:00000000 r5:000000d0 r4:eeaa5400
[ 813.695784] r3:00000009
[ 813.704335] [c00374a0] (warn_slowpath_null+0x0/0x2c) from [c05a9298] (cfg80211_disconnected+0xc0/0xcc)
[ 813.709770] wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 813.713141] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 813.727725] [c05a91d8] (cfg80211_disconnected+0x0/0xcc) from [bf0b6fc4] (wl_cfg80211_hang+0x4c/0xb8 [bcmdhd])
[ 813.757593] [bf0b6f78] (wl_cfg80211_hang+0x0/0xb8 [bcmdhd]) from [bf070f38] (dhd_hang_process+0x44/0x4c [bcmdhd])
[ 813.766377] r6:d401a500 r5:d4016600 r4:eea17800
[ 813.777763] [bf070ef4] (dhd_hang_process+0x0/0x4c [bcmdhd]) from [c004db88] (process_one_work+0x124/0x394)
[ 813.778948] r4:ef0390c0 r3:bf070ef4
[ 813.787944] [c004da64] (process_one_work+0x0/0x394) from [c004e18c] (worker_thread+0x17c/0x36c)
[ 813.794773] [c004e010] (worker_thread+0x0/0x36c) from [c0052d68] (kthread+0x90/0x9c)
[ 813.800968] [c0052cd8] (kthread+0x0/0x9c) from [c003b3c0] (do_exit+0x0/0x7a4)
[ 813.802066] r6:c003b3c0 r5:c0052cd8 r4:ef05feb8
[ 813.807950] —[ end trace 138de54306414382 ]—
[ 813.813933] cfg80211: Calling CRDA to update world regulatory domain
[ 909.482108] net_ratelimit: 3 callbacks suppressed
[ 909.485907] dhd_ioctl_entry: HANG was sent up earlier
[ 909.489718] dhd_ioctl_entry: HANG was sent up earlier
[ 909.493989] dhd_ioctl_entry: HANG was sent up earlier
[ 909.497808] dhd_ioctl_entry: HANG was sent up earlier
[ 909.501946] dhd_ioctl_entry: HANG was sent up earlier
[ 909.505737] dhd_ioctl_entry: HANG was sent up earlier
[ 909.509548] dhd_ioctl_entry: HANG was sent up earlier
[ 909.513791] dhd_ioctl_entry: HANG was sent up earlier
[ 909.517607] dhd_ioctl_entry: HANG was sent up earlier
[ 909.521734] dhd_ioctl_entry: HANG was sent up earlier
[ 909.526302] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 909.535577] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 909.544583] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 909.555016] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 909.563993] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 909.573461] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 910.624902] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 910.633751] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 910.642549] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 911.706850] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 911.715748] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 911.724576] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 912.791726] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 912.802205] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 912.812402] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 913.887711] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 913.903832] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 913.914069] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 914.974920] net_ratelimit: 68 callbacks suppressed
[ 914.978680] dhd_ioctl_entry: HANG was sent up earlier
[ 914.982626] dhd_ioctl_entry: HANG was sent up earlier
[ 914.986402] dhd_ioctl_entry: HANG was sent up earlier
[ 914.990174] dhd_ioctl_entry: HANG was sent up earlier
[ 914.993989] dhd_ioctl_entry: HANG was sent up earlier
[ 914.997759] dhd_ioctl_entry: HANG was sent up earlier
[ 915.001577] dhd_ioctl_entry: HANG was sent up earlier
[ 915.005346] dhd_ioctl_entry: HANG was sent up earlier
[ 915.009111] dhd_ioctl_entry: HANG was sent up earlier
[ 915.012935] dhd_ioctl_entry: HANG was sent up earlier
[ 915.017423] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 915.026327] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 915.035119] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 916.105388] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 916.114309] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 916.123137] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 917.207457] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 917.216585] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 917.226549] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1102.681881] net_ratelimit: 29 callbacks suppressed
[ 1102.685656] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.689855] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.693741] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.697534] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.701861] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.705653] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.709433] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.713414] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.717206] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.721007] dhd_ioctl_entry: HANG was sent up earlier
[ 1102.725690] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1102.735814] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1102.744850] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1102.753827] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1102.762968] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1102.771969] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1103.852292] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1103.861178] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1103.869907] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1104.929720] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1104.938759] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1104.948222] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1106.007234] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1106.016130] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1106.024932] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1107.085963] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1107.094851] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1107.103606] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[ 1108.164675] net_ratelimit: 68 callbacks suppressed
[ 1108.168435] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.172311] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.176089] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.179862] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.183707] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.187474] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.191293] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.195063] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.198829] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.202747] dhd_ioctl_entry: HANG was sent up earlier
[ 1108.207346] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring.
[ 1108.216228] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring.
[ 1108.225003] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring.
[39752.493984] ehci_irq: port change detect
[39752.498056] usb 3-1: USB disconnect, device number 2
root@cubietruck:/#
root@cubietruck:/# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.79 (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Mar 22 18:38:45 CST 2014 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun7i [ 0.000000] Memory Reserved: [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB) [ 0.000000] G2D : 0x50000000 - 0x50ffffff ( 16 MB) [ 0.000000] LCD : 0x51000000 - 0x52ffffff ( 32 MB) [ 0.000000] cma: CMA: reserved 192 MiB at 43c00000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected. [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] free_area_init_node: node 0, pgdat c08ae200, node_mem_map d3000000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 128016 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2576 pages used for memmap [ 0.000000] HighMem zone: 327152 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @d400e000 s7040 r8192 d13440 u32768 [ 0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192 [ 0.000000] Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try ’cgroup_disable=memory’ option if you don’t want memory cgroups [ 0.000000] Memory: 2048MB = 2048MB total [ 0.000000] Memory: 1818820k/1818820k available, 278332k reserved, 1318912K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0810000 (8224 kB) [ 0.000000] .init : 0xc0810000 - 0xc0848b80 ( 227 kB) [ 0.000000] .data : 0xc084a000 - 0xc08b63b0 ( 433 kB) [ 0.000000] .bss : 0xc08b6get="_blank">3d4 - 0xc0a740f8 (1784 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:192 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] start_kernel(): bug: interrupts were enabled early [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.014082] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928) [ 0.076011] pid_max: default: 32768 minimum: 301 [ 0.079726] Mount-cache hash table entries: 512 [ 0.084075] Initializing cgroup subsys cpuacct [ 0.087422] Initializing cgroup subsys memory [ 0.090863] Initializing cgroup subsys devices [ 0.094326] Initializing cgroup subsys freezer [ 0.097567] Initializing cgroup subsys blkio [ 0.101259] Initializing cgroup subsys perf_event [ 0.104860] CPU: Testing write buffer coherency: ok [ 0.110111] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.117255] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available [ 0.122826] Setting up static identity map for 0x405c43d0 - 0x405c4428 [ 0.238813] CPU1: Booted secondary processor [ 0.297781] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.299797] Brought up 2 CPUs [ 0.305161] SMP: Total of 2 processors activated (3640.52 BogoMIPS). [ 0.308540] devtmpfs: initialized [ 0.316027] dummy: [ 0.326778] NET: Registered protocol family 16 [ 0.335901] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.343930] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.348760] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.351950] [ccu-inf] aw clock manager init [ 0.354237] [ccu-inf] aw_ccu_init [ 0.358226] [ccu-inf] script config pll3 to 297MHz [ 0.361996] [ccu-inf] script config pll4 to 300MHz [ 0.365781] [ccu-inf] script config pll6 to 600MHz [ 0.369548] [ccu-inf] script config pll7 to 297MHz [ 0.373313] [ccu-inf] script config pll8 to 336MHz [ 0.376137] Init eGon pin module V2.0 [ 0.385576] bio: create slab bio-0 at 0 [ 0.389176] sunxi_gpio driver init ver 1.3 [ 0.394899] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO [ 0.398108] Sget="_blank">CSI subsystem initialized [ 0.401057] libata version 3.00 loaded. [ 0.405769] usbcore: registered new interface driver usbfs [ 0.410145] usbcore: registered new interface driver hub [ 0.414375] usbcore: registered new device driver usb [ 0.417559] Linux media interface: v0.10 [ 0.421193] Linux video capture interface: v2.00 [ 0.426912] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.433092] cfg80211: get="_blank">Calling get="_blank">CRDA to update world regulatory domain [ 0.437801] Switching to clocksource arch_sys_counter [ 0.439977] FS-get="_blank">Cache: Loaded [ 0.442218] get="_blank">CacheFiles: Loaded [ 0.456993] config i2c gpio with gpio_config api [ 0.460300] I2get="_blank">C: i2c-0: AW16XX I2get="_blank">C adapter [ 0.464397] NET: Registered protocol family 2 [ 0.470815] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.477930] Tget="_blank">CP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.485529] Tget="_blank">CP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.492151] Tget="_blank">CP: Hash tables configured (established 131072 bind 65536) [ 0.494379] Tget="_blank">CP: reno registered [ 0.499271] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.504640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.508321] NET: Registered protocol family 1 [ 0.513679] RPget="_blank">C: Registered named UNIX socket transport module. [ 0.517364] RPget="_blank">C: Registered udp transport module. [ 0.521035] RPget="_blank">C: Registered tcp transport module. [ 0.526529] RPget="_blank">C: Registered tcp NFSv4.1 backchannel transport module. [ 0.529339] pm: select wifi: ap6210 [ 0.532130] ap6xxx: config 32k clock [ 0.535368] [wifi_pm]: wifi gpio init is OK !! [ 0.538390] [rfkill]: rfkill set power 0 [ 0.543599] audit: initializing netlink socket (disabled) [ 0.547331] type=2000 audit(0.520:1): initialized [ 0.551751] highmem bounce pool size: 64 pages [ 0.565057] VFS: Disk quotas dquot_6.5.2 [ 0.570594] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.577903] NFS: Registering the id_resolver key type [ 0.582844] NTFS driver 2.1.30 [Flags: R/W]. [ 0.586260] fuse init (API version 7.18) [ 0.589854] msgmni has been set to 1360 [ 0.601495] alg: comp: get="_blank">Compression test 1 failed for lzo-generic: output len = 57 [ 0.604866] alg: No test for stdrng (krng) [ 0.611619] Block layer Sget="_blank">CSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.614639] io scheduler noop registered [ 0.617882] io scheduler deadline registered [ 0.621763] io scheduler cfq registered (default) [ 0.626752] sunxi disp driver loaded (/dev/disp api 1.0) [ 0.632410] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.637342] [uart]: used uart info.: 0x05 [ 0.642070] [uart]: serial probe 0 irq 33 mapbase 0x01c28000 [ 0.668536] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A [ 1.415958] console [ttyS0] enabled [ 1.424468] [uart]: serial probe 2 irq 35 mapbase 0x01c28800 [ 1.456509] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A [ 1.466228] G2D: drv_g2d_init [ 1.473948] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000 [ 1.482940] G2D: head:d0000000,tail:d1000000 [ 1.490565] G2D: Module initialized.major:250 [ 1.498133] brd: module loaded [ 1.507786] loop: module loaded [ 1.514342] [NAND] nand driver version: 0x2 0x9 [ 1.581930] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411 [ 1.595049] Dev Sunxi softw311 nand magic does not match for MBR 2: [ 1.608124] Dev Sunxi softw311 nand magic does not match for MBR 3: [ 1.621205] Dev Sunxi softw311 nand magic does not match for MBR 4: [ 1.636007] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present. [ 1.651974] Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0 [ 1.663890] Dev Sunxi softw411 nand header: get="_blank">CRget="_blank">C bad for MBR 2 [ 1.676571] Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0 [ 1.688459] Dev Sunxi softw411 nand header: get="_blank">CRget="_blank">C bad for MBR 3 [ 1.701094] Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0 [ 1.712996] Dev Sunxi softw411 nand header: get="_blank">CRget="_blank">C bad for MBR 4 [ 1.724180] Dev Sunxi softw411 nand: part 1, start 32768, size 131072 [ 1.736213] Dev Sunxi softw411 nand: part 2, start 163840, size 6291456 [ 1.748501] Dev Sunxi softw411 nand: part 3, start 6455296, size 8585216 [ 1.757752] nand: nanda nandb nandc [ 1.764745] [NAND]nand driver, ok. [ 1.774622] sw_ahci sw_ahci.0: controller can’t do PMP, turning off get="_blank">CAP_PMP [ 1.785905] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1 [ 1.798689] sw_ahci sw_ahci.0: AHget="_blank">CI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.813618] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc [ 1.825552] scsi0 : sw_ahci_platform [ 1.836436] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.847757] PPP generic driver version 2.4.2 [ 1.856130] PPP BSD get="_blank">Compression module registered [ 1.864882] PPP Deflate get="_blank">Compression module registered [ 1.875128] PPP MPPE get="_blank">Compression module registered [ 1.883448] NET: Registered protocol family 24 [ 1.893898] ehci_hcd: USB 2.0 ’Enhanced’ Host get="_blank">Controller (EHget="_blank">CI) Driver [ 1.905704] ohci_hcd: USB 1.1 ’Open’ Host get="_blank">Controller (OHget="_blank">CI) Driver [ 1.914391] [sw-ehci1]: open clock [ 1.940494] [sw-ehci1]: Set USB Power ON [ 1.950859] sw-ehci sw-ehci.1: SW USB2.0 ’Enhanced’ Host get="_blank">Controller (EHget="_blank">CI) Driver [ 1.964703] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1 [ 1.978290] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000 [ 2.002262] sw-ehci sw-ehci.1: USB 2.0 started, EHget="_blank">CI 1.00 [ 2.011267] hub 1-0:1.0: USB hub found [ 2.017931] hub 1-0:1.0: 1 port detected [ 2.024649] [sw-ohci1]: open clock [ 2.054235] sw-ohci sw-ohci.1: SW USB2.0 ’Open’ Host get="_blank">Controller (OHget="_blank">CI) Driver [ 2.067714] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2 [ 2.079117] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400 [ 2.145416] hub 2-0:1.0: USB hub found [ 2.152139] hub 2-0:1.0: 1 port detected [ 2.158790] [sw-ehci2]: open clock [ 2.184955] [sw-ehci2]: Set USB Power ON [ 2.195349] sw-ehci sw-ehci.2: SW USB2.0 ’Enhanced’ Host get="_blank">Controller (EHget="_blank">CI) Driver [ 2.209188] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3 [ 2.222731] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000 [ 2.252342] sw-ehci sw-ehci.2: USB 2.0 started, EHget="_blank">CI 1.00 [ 2.261309] hub 3-0:1.0: USB hub found [ 2.267970] hub 3-0:1.0: 1 port detected [ 2.274663] [sw-ohci2]: open clock [ 2.304248] sw-ohci sw-ohci.2: SW USB2.0 ’Open’ Host get="_blank">Controller (OHget="_blank">CI) Driver [ 2.317680] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4 [ 2.329107] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400 [ 2.395411] hub 4-0:1.0: USB hub found [ 2.402126] hub 4-0:1.0: 1 port detected [ 2.411493] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 2.419915] sunxi_musb_drvinit(): [ 2.425562] sunxi_musb_probe(): [ 2.430918] sunxi_musb_init(): [ 2.436025] usb_clock_init(): [ 2.441029] open_usb_clock(): [ 2.465617] UsbPhyInit(): [ 2.471227] sunxi_musb_board_priv_init(): [ 2.476645] pin_init(): [ 2.482004] USBget="_blank">C_ForceId(): id_type host [ 2.489591] USBC_ForceVbusValid(): vbus_type high [ 2.496589] sunxi_musb_disable(): [ 2.509487] musb-hdrc: get="_blank">ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, Softget="_blank">Conn) [ 2.523356] musb-hdrc: MHDRget="_blank">C RTL version 0.0 [ 2.531727] musb-hdrc: 11/11 max ep, 5184/8192 memory [ 2.540926] musb-hdrc musb-hdrc: MUSB HDRget="_blank">C host driver [ 2.552562] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 5 [ 2.563304] hub 5-0:1.0: USB hub found [ 2.569960] hub 5-0:1.0: 1 port detected [ 2.576139] sunxi_musb_enable(): [ 2.582595] sunxi_musb sunxi_musb: is_on = 1 [ 2.590610] sunxi_musb_board_priv_set_phy_power(): [ 2.599234] sunxi_musb sunxi_musb: Set USB Power On [ 2.607002] USBget="_blank">C_ForceId(): id_type host [ 2.614582] USBget="_blank">C_ForceVbusValid(): vbus_type high [ 2.626816] musb-hdrc musb-hdrc: USB Host mode controller at f00d8000 using PIO, IRQ 70 [ 2.639632] mousedev: PS/2 mouse device common for all mice [ 2.650234] input: sunxi-ir as /devices/virtual/input/input0 [ 2.657480] IR Initial OK [ 2.665704] ===========================hv_keypad_init===================== [ 2.675997] ========HV Inital =================== [ 2.684676] tkey_fetch_sysconfig_para: tkey_unused. [ 2.696873] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0 [ 2.709136] i2c i2c-0: Invalid probe address 0x00 [ 2.716595] rtc: enable pmu backup [ 2.726243] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0 [ 2.734897] i2c /dev entries driver [ 2.740422] [ace_drv] start!!! [ 2.745917] [ace_drv] init end!!! [ 2.750936] [pa_drv] start!!! [ 2.756197] [pa_drv] init end!!! [ 2.766583] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 2.780850] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 2.795108] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 2.809565] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 2.824184] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 2.838976] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 2.851099] device-mapper: uevent: version 1.0.3 [ 2.863548] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.877028] device-mapper: multipath: version 1.3.0 loaded [ 2.888060] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.900176] device-mapper: multipath queue-length: version 0.1.0 loaded [ 2.912375] device-mapper: multipath service-time: version 0.2.0 loaded [ 2.922358] cpuidle: using governor ladder [ 2.929339] cpuidle: using governor menu [ 2.935650] [mmc-msg] sw_mci_init [ 2.944758] [mmc-msg] MMget="_blank">C host used card: 0x9, boot card: 0x0, io_card 8 [ 2.957641] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 2.971939] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 2.989209] [mmc-msg] sdc0 Probe: base:0xf00dc000 irq:64 sg_cpu:c3c5f000(43c5f000) ret 0. [ 3.003297] [mmc-msg] sdc3 set round clock 400000, src 24000000 [ 3.017569] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 3.034826] [mmc-msg] sdc3 Probe: base:0xf00de000 irq:67 sg_cpu:c3c60000(43c60000) ret 0. [ 3.047627] [mmc_pm]: failed to fetch sdio card configuration! [ 3.055884] sunxi_leds driver init [ 3.063483] Registered led device: blue:ph21:led1 [ 3.072183] Registered led device: orange:ph20:led2 [ 3.080910] Registered led device: white:ph11:led3 [ 3.089587] Registered led device: green:ph07:led4 [ 3.099485] ledtrig-cpu: registered to indicate activity on get="_blank">CPUs [ 3.110826] usbcore: registered new interface driver usbhid [ 3.119267] usbhid: USB HID core driver [ 3.125997] ashmem: initialized [ 3.132843] logger: created 256K log ’log_main’ [ 3.141209] logger: created 256K log ’log_events’ [ 3.149666] logger: created 256K log ’log_radio’ [ 3.158110] logger: created 256K log ’log_system’ [ 3.169521] IPv4 over IPv4 tunneling driver [ 3.176754] Tget="_blank">CP: bic registered [ 3.182228] Tget="_blank">CP: cubic registered [ 3.188076] Tget="_blank">CP: westwood registered [ 3.194285] Tget="_blank">CP: highspeed registered [ 3.200246] Tget="_blank">CP: hybla registered [ 3.205746] Tget="_blank">CP: htcp registered [ 3.211257] Tget="_blank">CP: vegas registered [ 3.216757] Tget="_blank">CP: veno registered [ 3.222528] Tget="_blank">CP: scalable registered [ 3.228115] Tget="_blank">CP: lp registered [ 3.233403] Tget="_blank">CP: yeah registered [ 3.239164] Tget="_blank">CP: illinois registered [ 3.245995] Initializing XFRM netlink socket [ 3.254511] NET: Registered protocol family 10 [ 3.263567] NET: Registered protocol family 17 [ 3.271526] NET: Registered protocol family 15 [ 3.280651] [mmc_pm]: No sdio card, please check your config !! [ 3.290268] Registering the dns_resolver key type [ 3.300185] ata1: SATA link up 3.0 Gbps (SStatus 123 Sget="_blank">Control 300) [ 3.308505] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 3.324853] Registering SWP/SWPB emulation handler [ 3.335090] ata1.00: HPA detected: current 62531183, native 62533296 [ 3.348063] [cpu_freq] ERR:try to get regulator failed, core vdd will not changed! [ 3.360293] ata1.00: ATA-9: KingFast, KFJ14001, max UDMA/100 [ 3.371860] [cpu_freq] INF:-------------------V-F Table------------------- [ 3.384331] ata1.00: 62531183 sectors, multi 1: LBA48 Nget="_blank">CQ (depth 31/32) [ 3.396014] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz [ 3.407217] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz [ 3.418423] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz [ 3.427846] ata1.00: configured for UDMA/100 [ 3.437188] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz [ 3.448420] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz [ 3.459585] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz [ 3.473310] scsi 0:0:0:0: Direct-Access ATA KingFast KFJ1 PQ: 0 ANSI: 5 [ 3.486519] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz [ 3.500003] sd 0:0:0:0: [sda] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 3.505053] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz [ 3.524490] [cpu_freq] INF:----------------------------------------------- [ 3.541149] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz [ 3.555047] registered taskstats version 1 [ 3.564253] [DISP] Invalid mode string: EDID:1280x720p50, ignoring [ 3.573297] I2get="_blank">C: i2c-1: HDMI I2C adapter [ 3.581567] sd 0:0:0:0: [sda] Write Protect is off [ 3.590409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.603614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 3.619335] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 3.628442] sda: sda1 [ 3.636063] sd 0:0:0:0: [sda] Attached Sget="_blank">CSI disk [ 4.219612] EDID mode used without valid EDID info [ 4.226055] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 4.229992] EDID mode used without valid EDID info [ 4.236417] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 4.269284] get="_blank">Console: switching to colour frame buffer device 160x45 [ 4.276413] EDID mode used without valid EDID info [ 4.282763] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 4.411407] ehci_irq: port change detect [ 4.435712] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 4.450708] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 4.465461] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 4.484896] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 4.504089] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 4.523153] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 4.538437] console [netcon0] enabled [ 4.550524] netconsole: network logging started [ 4.572516] sunxi-rtc sunxi-rtc: setting system clock to 2014-05-05 04:48:23 UTget="_blank">C (1399265303) [ 4.588282] ALSA device list: [ 4.599394] #0: sunxi-get="_blank">CODEget="_blank">C Audio get="_blank">Codec [ 4.632152] EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard [ 4.650521] VFS: Mounted root (ext4 filesystem) on device 93:2. [ 4.675940] devtmpfs: mounted [ 4.687248] Freeing init memory: 224K [ 4.701745] Write protecting the kernel text section c0008000 - c0810000 [ 4.719096] usb 3-1: new high-speed USB device number 2 using sw-ehci [ 4.887257] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 4.907495] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 4.927482] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 4.948192] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 4.968470] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 4.990210] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 5.422197] init: ureadahead main process (66) terminated with status 5 [ 5.464611] init: plymouth main process (67) killed by SEGV signal [ 6.333360] udevd[144]: starting version 175 [ 6.519149] pwm-sunxi: pwm0 configured - period: 20, duty_percent: 50, duty: 10 [ 6.648604] gmac: use mac address from chipid [ 6.669957] eth%d: device MAget="_blank">C address 02:8c:02:82:c5:8a [ 6.684052] [gmac]: sun6i_gmac platform driver registration completed [ 6.700235] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 6.710074] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 6.728303] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 6.749725] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 6.763108] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 6.773088] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 6.937274] Initializing USB Mass Storage driver... [ 7.002989] scsi1 : get="_blank">usb-storage 3-1:1.0 [ 7.010170] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 7.015651] usbcore: registered new interface driver usb-storage [ 7.019244] USB Mass Storage support registered. [ 7.034737] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 7.041429] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 7.127801] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 7.140860] UMP2: Inserting UMP device driver. Compiled: Mar 22 2014, time: 18:34:56 [ 7.160562] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 7.176050] EDID mode used without valid EDID info [ 7.182430] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 7.185570] UMP2: Using OS memory backend, allocation limit: 134217728 [ 7.208519] UMP: UMP device driver loaded [ 7.223906] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 7.376142] EDID mode used without valid EDID info [ 7.382507] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 7.430456] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 7.431682] Mali: permit MALI_IOget="_blank">C_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432) [ 7.450755] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 7.462971] mali: use config clk_div 1 [ 7.473304] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 7.477038] mali: clk_div 1 [ 7.480476] Mali: mali clock set completed, clock is 312000000 Hz [ 7.502702] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 7.505955] mali: use config clk_div 1 [ 7.507915] mali: clk_div 1 [ 7.508576] Mali: mali clock set completed, clock is 312000000 Hz [ 7.543074] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 7.544640] Mali: Mali device driver loaded [ 7.590596] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 7.849092] [cedar dev]: install start!!! [ 7.860106] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 7.873126] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 7.879343] [cedar dev]: install end!!! [ 7.905158] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 7.912012] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 7.924511] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 7.931651] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 8.006101] scsi 1:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6 [ 8.027494] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 8.039403] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 8.048891] sd 1:0:0:0: [sdb] 30883840 512-byte logical blocks: (15.8 GB/14.7 GiB) [ 8.063024] sd 1:0:0:0: [sdb] Write Protect is off [ 8.067327] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8.074361] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 8.084709] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn’t support DPO or FUA [ 8.091631] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 8.101481] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 8.108595] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 8.114069] sdb: sdb4 [ 8.125943] bcmdhd: got gpio2, mapped to irqno170 [ 8.132969] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 8.145952] sd 1:0:0:0: [sdb] Attached Sget="_blank">CSI removable disk [ 8.402611] sdio wifi power state: on [ 8.415516] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 8.430407] [mmc-msg] sdc3 power on [ 8.456304] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 8.461247] [mmc-msg] sdc3 set round clock 400000, src 24000000 [ 8.543676] [mmc-err] smc 3 err, cmd 52, RTO [ 8.550591] [rfkill]: rfkill set power 1 [ 8.557361] [mmc-err] smc 3 err, cmd 52, RTO [ 8.575044] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 8.596959] =========== WLAN placed in POWER ON ======== [ 8.610734] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 8.623815] [mmc-err] smc 3 err, cmd 8, RTO [ 8.642622] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGAget="_blank">CY(SDR12) dt B [ 8.663529] mmc1: queuing unknown get="_blank">CIS tuple 0x80 (2 bytes) [ 8.675981] mmc1: queuing unknown get="_blank">CIS tuple 0x80 (3 bytes) [ 8.688357] mmc1: queuing unknown get="_blank">CIS tuple 0x80 (3 bytes) [ 8.700575] mmc1: queuing unknown get="_blank">CIS tuple 0x80 (7 bytes) [ 8.735194] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 8.748847] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 8.754500] [mmc-msg] sdc3 set round clock 42857143, src 600000000 [ 8.765814] sunxi_gmac: probed [ 8.771245] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active [ 8.781549] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01) [ 8.791170] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 8.803519] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 8.825166] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 8.832245] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 8.841007] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 8.848077] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 8.855219] mmc1: new high speed SDIO card at address 0001 [ 8.862243] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 8.874165] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 8.876788] Linux Kernel SDIO/MMget="_blank">C Driver [ 8.888634] init: plymouth-log main process (300) terminated with status 1 [ 8.895349] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 8.907823] bcmdhd: irq=170, flags=0x00000414 [ 8.920041] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 8.927086] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 8.930837] dhdsdio_probe : no mutex held. set lock [ 8.937370] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 8.941554] F1 signature read @0x18000000=0x1591a962 [ 8.948626] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 8.952724] bcmsdh_config_hw_oob_intr: Enter [ 8.962390] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 8.966928] DHD: dongle ram size is set to 245760(orig 245760) [ 8.971314] dhd_attach, firmware path [ 8.989006] wl_create_event_handler thr:147 created [ 8.992837] wl_create_event_handler thr:147 started [ 8.999051] p2p0: P2P Interface Registered [ 9.010546] dhd_attach thr:149 created [ 9.019181] dhd_attach thr:149 started [ 9.023004] dhd_attach thr:14b created [ 9.031451] dhd_attach thr:14b started [ 9.037744] dhd_attach thr:14d created [ 9.042126] dhd_attach thr:14d started [ 9.064471] Broadcom Dongle Host Driver: register interface [wlan0] MAget="_blank">C: 00:90:4c:11:22:33 [ 9.078017] dhdsdio_probe : the lock is released. [ 9.085681] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 9.095508] [ 9.095512] Dongle Host Driver, version 1.28.23.3 (r) [ 9.095517] get="_blank">Compiled in drivers/net/wireless/bcmdhd on Feb 14 2014 at 00:09:03 [ 9.103163] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET [ 9.109872] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 9.116701] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 9.132255] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 9.147632] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 9.156758] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 9.183946] dhd_open, firmware path [ 9.193795] [ 9.193810] Dongle Host Driver, version 1.28.23.3 (r) [ 9.193815] get="_blank">Compiled in drivers/net/wireless/bcmdhd on Feb 14 2014 at 00:09:03 [ 9.202894] wl_android_wifi_on in [ 9.205445] wl_android_wifi_on: Success [ 9.208840] [mmc-err] smc 3 err, cmd 52, RTO [ 9.223593] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110 [ 9.228197] [mmc-err] smc 3 err, cmd 52, RTO [ 9.242782] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110 [ 9.248526] [mmc-err] smc 3 err, cmd 52, RTO [ 9.262959] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110 [ 9.275737] dhdsdio_htclk: HT Avail request error: -35 [ 9.280455] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin [ 9.287441] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt [ 9.290841] [mmc-err] smc 3 err, cmd 52, RTO [ 9.305144] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.309406] [mmc-err] smc 3 err, cmd 52, RTO [ 9.323656] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.331260] [mmc-err] smc 3 err, cmd 52, RTO [ 9.341767] sdio wifi power state: off [ 9.347264] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.350652] [mmc-err] smc 3 err, cmd 52, RTO [ 9.364681] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.369835] [mmc-err] smc 3 err, cmd 52, RTO [ 9.383777] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.388080] [mmc-err] smc 3 err, cmd 52, RTO [ 9.401839] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.405297] [mmc-err] smc 3 err, cmd 52, RTO [ 9.419004] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.423370] [mmc-err] smc 3 err, cmd 52, RTO [ 9.436902] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.441218] [mmc-err] smc 3 err, cmd 52, RTO [ 9.454657] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.458046] [mmc-err] smc 3 err, cmd 52, RTO [ 9.471337] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.475689] [mmc-err] smc 3 err, cmd 52, RTO [ 9.486404] =========== WLAN placed in RESET ======== [ 9.491912] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.496281] [mmc-err] smc 3 err, cmd 52, RTO [ 9.509618] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.517842] [mmc-err] smc 3 err, cmd 52, RTO [ 9.531149] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.537331] [mmc-err] smc 3 err, cmd 52, RTO [ 9.550544] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.563672] [mmc-err] smc 3 err, cmd 52, RTO [ 9.577493] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.580905] [mmc-err] smc 3 err, cmd 52, RTO [ 9.593761] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.604635] [mmc-err] smc 3 err, cmd 52, RTO [ 9.618587] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.624299] [mmc-err] smc 3 err, cmd 52, RTO [ 9.637115] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.641597] [mmc-err] smc 3 err, cmd 52, RTO [ 9.654506] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.658824] [mmc-err] smc 3 err, cmd 52, RTO [ 9.671590] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.676116] [mmc-err] smc 3 err, cmd 52, RTO [ 9.688568] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.692071] [mmc-err] smc 3 err, cmd 52, RTO [ 9.704591] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.708919] [mmc-err] smc 3 err, cmd 52, RTO [ 9.721165] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.726225] [mmc-err] smc 3 err, cmd 52, RTO [ 9.738325] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.745911] [mmc-err] smc 3 err, cmd 52, RTO [ 9.758032] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 [ 9.762471] [mmc-err] smc 3 err, cmd 52, RTO [ 9.774324] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 [ 9.778684] [mmc-err] smc 3 err, cmd 52, RTO [ 9.790332] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 [ 9.794028] dhdsdio_membytes: window change failed [ 9.797451] [mmc-err] smc 3 err, cmd 52, RTO [ 9.809026] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.813725] [mmc-err] smc 3 err, cmd 52, RTO [ 9.825237] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.829697] [mmc-err] smc 3 err, cmd 52, RTO [ 9.841201] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 [ 9.845821] dhdsdio_membytes: FAILED to set window back to 0x0 [ 9.851207] _dhdsdio_download_firmware: error placing ARM core in reset [ 9.863691] dhd_bus_start: dhdsdio_probe_download failed. firmware = /lib/firmware/ap6210/fw_bcm40181a2.bin nvram = /lib/firmware/ap6210/nvram_ap6210.txt [ 9.865931] wl_android_wifi_off in [ 10.791102] PHY: sunxi_gget="_blank">mac-0:00 - Link is Up - 100/Full [ 13.450402] init: smbd main process (316) killed by HUP signal [ 13.454929] init: smbd main process ended, respawning [ 18.505724] init: plymouth-upstart-bridge main process (414) terminated with status 1 [ 19.740848] eth0: no IPv6 routers present [ 20.006795] ip_tables: (get="_blank">C) 2000-2006 Netfilter get="_blank">Core Team [ 20.120360] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 131.416276] EDID mode used without valid EDID info [ 131.424946] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 131.579632] EDID mode used without valid EDID info [ 131.586094] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0 [ 131.641434] Warning: this sunxi disp driver will see significant redesign. [ 131.647061] Applications using /dev/disp directly will break. [ 131.656905] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver [ 131.662542] [DISP] layer allocated: 0,101 [ 131.666717] [DISP] request scaler fail [ 131.670954] [DISP] request scaler layer fail! [ 134.424444] [drm] Initialized drm 1.1.0 20060810 [ 134.473479] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 134.481434] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 134.488544] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 134.494079] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 134.501028] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 134.507115] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1 [ 134.513651] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 134.517894] UMP2: New session opened [ 134.526194] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 134.534143] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 134.541199] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 134.549024] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 134.556819] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 136.871416] disp resume [ 143.233584] init: tty1 main process (915) killed by TERM signal [ 172.196567] sunxi_gmac: probed [ 172.203111] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active [ 172.207921] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01) [ 172.215792] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral [ 172.223445] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral [ 172.231555] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral [ 172.239463] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral [ 172.246826] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral [ 172.251114] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 172.261246] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral [ 174.218135] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full [ 174.225434] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 184.432744] eth0: no IPv6 routers present [ 736.618491] disp resume [ 736.620074] disp suspend [ 813.552509] net_ratelimit: 1 callbacks suppressed [ 813.558180] dhd_check_hang: Event HANG send up due to re=0 te=0 e=-36 s=0 [ 813.561632] CFG80211-ERROR) wl_cfg80211_hang : In : chip crash eventing [ 813.567488] ------------[ cut here ]------------ [ 813.571332] dhd_ioctl_entry: HANG was sent up earlier [ 813.575124] dhd_ioctl_entry: HANG was sent up earlier [ 813.578899] dhd_ioctl_entry: HANG was sent up earlier [ 813.588131] WARNING: at /work/linux-sdk/linux-sunxi/net/wireless/sme.c:741 cfg80211_disconnected+0xc0/0xcc() [ 813.592030] dhd_ioctl_entry: HANG was sent up earlier [ 813.595803] dhd_ioctl_entry: HANG was sent up earlier [ 813.599599] dhd_ioctl_entry: HANG was sent up earlier [ 813.601513] Modules linked in: disp_ump mali_drm drm iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables bcmdhd sunxi_cedar_mod mali ump usb_storage lcd sunxi_gmac pwm_sunxidhd_ioctl_entry: HANG was sent up earlier [ 813.624601] dhd_ioctl_entry: HANG was sent up earlier [ 813.628376] dhd_ioctl_entry: HANG was sent up earlier [ 813.628609] [ 813.629584] Backtrace: [ 813.636929] [c0012ae4] (dump_backtrace+0x0/0x10c) from [c05bbbb8] (dump_stack+0x18/0x1c) [ 813.638001] r6:000002e5 [ 813.660973] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : r5:c05a9298 r4:00000000 r3:271ae953 [ 813.672024] [c05bbba0] (dump_stack+0x0/0x1c) from [c0037488] (warn_slowpath_common+0x54/0x6c) [ 813.680332] [c0037434] (warn_slowpath_common+0x0/0x6c) from [c00374c4] (warn_slowpath_null+0x24/0x2c) [ 813.685871] wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 813.689294] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : r8:00000000 r7:ee040120 r6:00000000 r5:000000d0 r4:eeaa5400 [ 813.695784] r3:00000009 [ 813.704335] [c00374a0] (warn_slowpath_null+0x0/0x2c) from [c05a9298] (cfg80211_disconnected+0xc0/0xcc) [ 813.709770] wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 813.713141] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 813.727725] [c05a91d8] (cfg80211_disconnected+0x0/0xcc) from [bf0b6fc4] (wl_cfg80211_hang+0x4c/0xb8 [bcmdhd]) [ 813.757593] [bf0b6f78] (wl_cfg80211_hang+0x0/0xb8 [bcmdhd]) from [bf070f38] (dhd_hang_process+0x44/0x4c [bcmdhd]) [ 813.766377] r6:d401a500 r5:d4016600 r4:eea17800 [ 813.777763] [bf070ef4] (dhd_hang_process+0x0/0x4c [bcmdhd]) from [c004db88] (process_one_work+0x124/0x394) [ 813.778948] r4:ef0390c0 r3:bf070ef4 [ 813.787944] [c004da64] (process_one_work+0x0/0x394) from [c004e18c] (worker_thread+0x17c/0x36c) [ 813.794773] [c004e010] (worker_thread+0x0/0x36c) from [c0052d68] (kthread+0x90/0x9c) [ 813.800968] [c0052cd8] (kthread+0x0/0x9c) from [c003b3c0] (do_exit+0x0/0x7a4) [ 813.802066] r6:c003b3c0 r5:c0052cd8 r4:ef05feb8 [ 813.807950] ---[ end trace 138de54306414382 ]--- [ 813.813933] cfg80211: Calling CRDA to update world regulatory domain [ 909.482108] net_ratelimit: 3 callbacks suppressed [ 909.485907] dhd_ioctl_entry: HANG was sent up earlier [ 909.489718] dhd_ioctl_entry: HANG was sent up earlier [ 909.493989] dhd_ioctl_entry: HANG was sent up earlier [ 909.497808] dhd_ioctl_entry: HANG was sent up earlier [ 909.501946] dhd_ioctl_entry: HANG was sent up earlier [ 909.505737] dhd_ioctl_entry: HANG was sent up earlier [ 909.509548] dhd_ioctl_entry: HANG was sent up earlier [ 909.513791] dhd_ioctl_entry: HANG was sent up earlier [ 909.517607] dhd_ioctl_entry: HANG was sent up earlier [ 909.521734] dhd_ioctl_entry: HANG was sent up earlier [ 909.526302] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 909.535577] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 909.544583] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 909.555016] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 909.563993] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 909.573461] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 910.624902] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 910.633751] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 910.642549] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 911.706850] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 911.715748] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 911.724576] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 912.791726] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 912.802205] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 912.812402] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 913.887711] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 913.903832] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 913.914069] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 914.974920] net_ratelimit: 68 callbacks suppressed [ 914.978680] dhd_ioctl_entry: HANG was sent up earlier [ 914.982626] dhd_ioctl_entry: HANG was sent up earlier [ 914.986402] dhd_ioctl_entry: HANG was sent up earlier [ 914.990174] dhd_ioctl_entry: HANG was sent up earlier [ 914.993989] dhd_ioctl_entry: HANG was sent up earlier [ 914.997759] dhd_ioctl_entry: HANG was sent up earlier [ 915.001577] dhd_ioctl_entry: HANG was sent up earlier [ 915.005346] dhd_ioctl_entry: HANG was sent up earlier [ 915.009111] dhd_ioctl_entry: HANG was sent up earlier [ 915.012935] dhd_ioctl_entry: HANG was sent up earlier [ 915.017423] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 915.026327] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 915.035119] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 916.105388] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 916.114309] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 916.123137] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 917.207457] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 917.216585] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 917.226549] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1102.681881] net_ratelimit: 29 callbacks suppressed [ 1102.685656] dhd_ioctl_entry: HANG was sent up earlier [ 1102.689855] dhd_ioctl_entry: HANG was sent up earlier [ 1102.693741] dhd_ioctl_entry: HANG was sent up earlier [ 1102.697534] dhd_ioctl_entry: HANG was sent up earlier [ 1102.701861] dhd_ioctl_entry: HANG was sent up earlier [ 1102.705653] dhd_ioctl_entry: HANG was sent up earlier [ 1102.709433] dhd_ioctl_entry: HANG was sent up earlier [ 1102.713414] dhd_ioctl_entry: HANG was sent up earlier [ 1102.717206] dhd_ioctl_entry: HANG was sent up earlier [ 1102.721007] dhd_ioctl_entry: HANG was sent up earlier [ 1102.725690] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1102.735814] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1102.744850] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1102.753827] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1102.762968] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1102.771969] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1103.852292] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1103.861178] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1103.869907] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1104.929720] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1104.938759] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1104.948222] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1106.007234] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1106.016130] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1106.024932] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1107.085963] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1107.094851] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1107.103606] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [ 1108.164675] net_ratelimit: 68 callbacks suppressed [ 1108.168435] dhd_ioctl_entry: HANG was sent up earlier [ 1108.172311] dhd_ioctl_entry: HANG was sent up earlier [ 1108.176089] dhd_ioctl_entry: HANG was sent up earlier [ 1108.179862] dhd_ioctl_entry: HANG was sent up earlier [ 1108.183707] dhd_ioctl_entry: HANG was sent up earlier [ 1108.187474] dhd_ioctl_entry: HANG was sent up earlier [ 1108.191293] dhd_ioctl_entry: HANG was sent up earlier [ 1108.195063] dhd_ioctl_entry: HANG was sent up earlier [ 1108.198829] dhd_ioctl_entry: HANG was sent up earlier [ 1108.202747] dhd_ioctl_entry: HANG was sent up earlier [ 1108.207346] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b03 on p2p0 I/F. Ignoring. [ 1108.216228] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b1d on p2p0 I/F. Ignoring. [ 1108.225003] CFGP2P-ERROR) wl_cfgp2p_do_ioctl : wl_cfgp2p_do_ioctl: IOCTL req 0x8b09 on p2p0 I/F. Ignoring. [39752.493984] ehci_irq: port change detect [39752.498056] usb 3-1: USB disconnect, device number 2 root@cubietruck:/#
